Konica Minolta bizhub PRO C500 - Manual (Page 33)

Print a Job With Page Exceptions
IC-301 Print Controller for the bishub PRO C500 Printer 27
Print a Job With Page Exceptions
Procedure
Now you’ll print the same job as in the previous activities, but you will need to
change a few more parameters. In this activity, you will print one copy of the job
CyclingTours_Letter with the following requirements:
• Print double-side
• Insert a transparency sheet after the front cover
• Print front cover and back cover on a heavier paper stock
You define these parameters in the Finisher and Print areas of the Job Parameters
window.
To perform this activity you will need to place the required media types in the
following trays:
To define the job parameters for this activity:
7. In the Storage area, double-click CyclingTours_Letter .
8. Under Print , click Paper Stock .
9. In the Paper size list, select Letter (8.5×11) .
10. In the Media type list, select Normal .
11. In the Weight list, select 81-105 gsm .
Activity
3
Media type/finishing Tray number Comments
Transparencies Bypass Important!
On the control panel of the bizhub
PRO C500, set the
Bypass tray
paper to its minimum weight:
64 -74 gsm
Normal, 81-105 gsm Tray 1
Heavy paper, 163-209 gsm Tray 2
Note: This is the type of paper used for the regular pages.