Konica Minolta bizhub PRESS C8000 - Manual (Page 48)

IC-306 5-13
5.5 Registering the SMB server 5
5.5 Registering the SMB server
If you want to send the scanned data to the SMB server, you can register the address SMB server. The reg-
istration is done in the following steps.
0 For SMB, addresses can be registered as many as 30 in sum.
1
Press [SCAN] tab.
2
Press [SMB].
% In the initial settings, the Select Addresses screen (E-mail) is displayed. For information on the initial
settings of [SCAN] tab, contact your administrator of the copier.
% If the SMB server is already registered, the Name is displayed.
% In the initial settings, such index keys as [A-C] and [D-F] are displayed.
3
Press [Register/Edit].
4
Press [Add].