Konica Minolta bizhub PRESS C8000 - Manual (Page 84)

IC-306 6-28
6.6 Transmission to a Group 6
6.6 Transmission to a Group
When you send the scanned data to a registered Group, follow the steps below.
0
For information on how to register a Group, refer to page 5-16.
1
Press [SCAN] tab.
2
Press [Group].
% In the initial settings, the Select Addresses screen (E-mail) is displayed. For information on the initial
settings of [SCAN] tab, contact your administrator of the copier.
3
Press the Name of the address Group.
% To deselect the Name, press the selected Name again.
% Select a group and press [List] to display the address list for the group.
% Press [Edit] on the group address list screen to change what to include in a Group.