Printing to equal size, Printing to equal size -11 – Konica Minolta FK-502 User Manual

Page 109

Advertising
background image

C650

3-11

Reception

3

Pages are not divided if [Print Separate Fax Pages] is [ON] and [TX/RX Settings] in the Utility mode is
set as follows.
Tray is set to [Tray Selection for RX Print]
When [Min. Reduction for RX Print] is set to [Full Size]
When [Print Paper Selection] is set to [Fixed Size] or [Priority Size]
When [Duplex Print (RX)] is [ON]

Refer to "Settings of transmission and reception mode (TX/RX Settings)" on page 10-45 for [Tray
Selection for RX Print], [Min. Reduction for RX Print], [Print Paper Selection] and [Duplex Print (RX)].

When printable paper is not loaded, a message is displayed instructing you to load paper.

When [Print Paper Selection] is set to [Priority Size], A4, B4 or A3 is selected as the appropriate paper
size. When such sizes do not exist, a normal paper size is selected and printing conducted.
When [Print Paper Selection] is set to [Fixed Size], A4, B4 or A3 is selected as the appropriate paper
size. When such sizes do not exist, a message is displayed until paper has been loaded.
When [Tray Selection for RX Print] is set to a setting other than [Auto], the fax is printed on the paper of
the paper tray specified in the [Tray Selection for RX Print] (excluding manual tray). When the size is
smaller than the received original, it is reduced and then printed. When there is no paper in the specified
paper tray, a message is displayed until the paper is loaded.
When [Print Paper Selection] is set to a setting other than [Auto Select] and [Tray Selection for RX Print]
is also set to a setting other than [Auto], [Tray Selection for RX Print] is given priority.

Printing to equal size

When [Min. Reduction for RX Print] in the Utility mode is set to "Full Size", faxes are printed on paper of the
same size. If paper of the same size is not loaded, the fax is printed on larger-sized paper.

2

Note

Page cannot be divided

Images with sizes larger than A3 size cannot be printed.

When a paper of an appropriate size is not loaded, a message is displayed until paper is loaded.

Original

Printing to
equal size

Received original

Advertising
This manual is related to the following products: