Konica Minolta FK-502 - Manual (Page 268)

C650 10-48
Utility mode 10
10.18 Specifying the ON/OFF settings of the function (Function ON/OFF
Setting)
ON/OFF settings of the function for transmission or reception are specified.
F-Code TX: ON*/OFF
- Set whether or not to use the F-code transmission function.
- For details on the confidential function, refer to "Confidential transmission (F-Code TX)" on page 6-46.
- For details on F-Code transmission, refer to "Sending the fax after specifying the relay destination (F-
Code TX)" on page 6-48.
Relay RX: ON*/OFF
- At relay distribution station, original received from Originating station is broadcast to relay distribution
destination. The relay box should be registered in order to use the relay distribution function.
- For registration of relay box, refer to "Specifying Relay box settings" on page 9-29.
Relay Printing: ON/OFF*
- The original received from Originating station is printed.
Destination Check Display Function: ON/OFF*
- Whether or not to display the list of specified destinations at the time of sending the fax is set.
Confirm Address (TX): ON / OFF*
- Select whether the screen for entering the destination appears again for confirmation when the fax
recipient is specified manually. Requiring that the destination be entered twice reduces misdirected
faxes.
Confirm Address (Register): ON / OFF*
- Select whether the screen for entering the destination appears again for confirmation when a
destination is being registered. Requiring that the destination be entered twice reduces the possibility
of registering destinations incorrectly.
* is a default value at the time of procurement.
Specifying Function ON/OFF Setting
1
Display the Administrator Settings screen as described in "Displaying Administrator Settings screen"
on page 10-3.
2
Touch [Fax Settings].
– Some items may not be displayed according to setting options.
– In the Utility mode, the number displayed on button can be entered and selected on the keypad. For
[Fax settings], enter [8] on the keypad.