Konica Minolta FK-502 - Manual (Page 71)

C650 2-29
To send a fax 2
2.8 Operations while scanning
If original size cannot be detected
If the original size cannot be detected, the scan size screen is displayed. Set the original size.
1
Touch the Original Size button and then touch [OK].
For European model (Metric)
For North American model (Inch)
2
Touch [Close] and then touch [OK].
Fax/Scan screen is displayed.
3
Press [Start] key.
Fax is sent.
When there is a memory overflow
When using memory transmission, if the original contains many pages or when the original contains images
with fine details creating a large amount of data, the memory may became full.
In such cases, set the machine to Quick Memory TX and send the fax (Quick Memory TX can be set at the
Communication Method Settings in the Communication Settings screen).
!
Detail
Refer to "Error Messages" on page 4-4 for procedures when the memory becomes full.
Refer to "To use quick memory transmission" on page 2-42 regarding sending a fax using Quick
Memory TX.