Konica Minolta bizhub C20PX - Manual (Page 306)

Configuring the Printer 288
SNMP
The Network - SNMP window allows you to configure the following items:
Item Description
SNMP SNMP If Enable is selected, SNMP is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET -
TCP/IP - SNMP - ENABLE
SNMP v1/
v2c(IP) If Enable is selected, SNMP v1/v2c(IP) is enabled.
Choices: Enable, Disable
Default: Enable
SNMP
v3(IP) If Enable is selected, SNMP v3(IP) is enabled.
Choices: Enable, Disable
Default: Enable