1 before using the scan functions, Before using the scan functions, 1before using the scan functions – Konica Minolta bizhub C300 User Manual
Page 21
1
Before using the scan functions
1-2
C300
Be
fo
re
u
s
in
g t
he sca
n
f
unct
ion
s
Chapter 1
1
Before using the scan functions
1.1
Environment required for using the scan functions
The following conditions are required to use the network and scanning func-
tions of this machine.
-
The machine is connected to the network. (required)
The functions can be used over a TCP/IP network. For details on the con-
nection, refer to “Connecting to the network” on page 1-11. Also, net-
work parameters such as the IP address of this machine must be
specified in order to use the machine on the network. For details, refer to
“Settings for using network/scanning functions” on page 1-8.
-
The driver software is installed on the computer.
In order to use this machine as a scanner, the dedicated
KONICA MINOLTA TWAIN must be installed. For details, refer to the
TWAIN driver manual that is on the User Software CD-ROM.