Konica Minolta bizhub PRESS 1250P - Manual (Page 48)

Administrator Security Functions 2
2-40 bizhub PRESS 1250P
2.5
7
Select whether or not to overwrite the temporary data.
% To overwrite the temporary data, press [ON]. Otherwise, press [OFF].
8
If you choose to overwrite the data, select the desired erase mode.
% Press [Mode 1] or [Mode 2]. Please refer to the User's Guide - Main Body for details.
% If you choose not to overwrite the data, the mode selection does not make any difference.
9
Press [OK] on the Delete Temporary Data Setting Screen.
10
Turn OFF the sub power switch, and turn OFF the main power switch.
% Do not turn off the main power while the message [Cooling in progress / After cooling, power off
automatically] is displayed.
11
Please wait for more than 10 seconds.
12
Turn ON the main power switch, and turn ON the sub power switch.
2.5.4 Deleting All Data
You can choose to delete all the document data stored on HDD. When you choose to delete all the data,
select one of the 8 erase modes provided.
1
Press Utility/Counter on the control panel to display the Utility Menu Screen.
% To use this function of deleting all the data, please contact your service representative.
2
Press [04 Administrator Setting].
A password entry screen will be displayed.