To select a paper type setting, To select a paper type setting -37 – Konica Minolta BIZHUB C351 User Manual
Page 72
Using copy functions
2
C351
2-37
Using copy f
unct
ions
Chapter 2
To select a Paper Type setting
If a setting for special paper, such as overhead
projector transparencies and other special paper, is
selected for a paper drawer, that drawer is not selected
automatically with the “Auto Paper Select” setting or
the automatic paper-drawer-switching feature.
However, a paper drawer set to “Single Side Only” is
given priority when the “Auto Paper Select” setting is
specified.
There are limits on the types of paper that can be
loaded in a paper drawer. For details on the types of
paper that can be loaded, refer to the User’s Guide
[Copy Operations].
If overhead projector transparencies or thick paper is
loaded into the paper drawer, be sure to select the
corresponding paper type, otherwise a paper misfeed
may occur.
The following procedure describes how to specify the
setting for special paper loaded into the 1st drawer.