Konica Minolta bizhub C654 - Manual (Page 5)

bizhub C754/C654 1-2
1.1 Introduction 1
1 Security
1.1 Introduction
Thank you for purchasing our product.
This User’s Guide contains the operating procedures and precautions to be used when using the security
functions offered by the bizhub C754/C654 machine. To ensure the best possible performance and effective
use of the machine, read this manual thoroughly before using the security functions. The administrator of the
machine should keep this manual for ready reference. The manual should be of great help in finding solutions
to operating problems and questions.
This User’s Guide (Ver. 1.04) describes bizhub C754/bizhub C654 PKI Card System Control Software (MFP
Controller: A2X00Y0-0100-G00-53pki).
Compliance with the ISO15408 Standard
When the Enhanced Security Mode on this machine is set to [ON], more enhanced security functions are
available.
The security functions offered by the bizhub C754/C654 machine comply with ISO/IEC15408 (level: EAL3).
Operating Precautions
The machine gives an alarm message or an alarm sound (peep) when a wrong operation is performed or a
wrong entry is made during operation of the machine. (No "peep" alarm sound is issued if a specific sound
setting in Sound Setting of Accessibility Setting is set to [OFF].) If the alarm message or alarm sound is given,
perform the correct operation or make the correct entry according to the instructions given by the message
or other means.
The administrator of the machine should exit from the current mode to return to the basic screen whenever
the access to that mode is completed or if he or she leaves the machine with the mode screen left displayed.
The administrator of the machine should make sure that each individual general user exits from the current
mode to return to the basic screen whenever the access to that mode is completed or if the user leaves the
machine with the mode screen left displayed.
If an error message appears during operation of the machine, perform steps as instructed by the message.
For details of the error messages, refer to the User’s Guide furnished with the machine and that furnished
with the Authentication Unit. If the error cannot be remedied, contact your service representative.