Konica Minolta bizhub PRO C6501 - Manual (Page 23)

Stream Punch 2
bizhub PRO C6501 Additional Information 19
2.4.2 If Burrs Remain in Punch Holes Using Stream Punch GP-
501
If you find burrs remaining in punch holes when using the Stream Punch GP-
501, lubrication is required for the die set currently used.
Lubricate it at the position illustrated below.
2
Reminder
Never use the oil on the general market. For the oil to be used in this pro-
cedure, please contact your service representative.
If burrs still remain in punch holes after the lubrication, apply grease to the
positions illustrated below.