Konica Minolta bizhub PRO 950 - Manual (Page 155)

PCL Printer Driver Setting (Windows) 8
bizhub PRO 950 8-38
Center Staple and Fold
Staples at the center of the output paper and folds it into half.
The [Center Staple and Fold] cannot be set in the following cases:
-
When [FS-611] is not available in [Configure] tab.
Punch
The output paper can be set to be punched with 2 - 4 holes or stream holes.
The position will be changed according with the [Binding Position] setting.
The [Punch] cannot be set in the following cases:
-
When [Punch Unit], [Punch Z-Fold Unit] or [Stream Punch] is not available
in [Configure] tab.
- When [Booklet] is selected in [Setup] tab - [Print Type].
2 Holes / Left Binding
(Portrait)
2 Holes / Left Binding
(Landscape)
2 Holes / Right Binding
(Landscape)
2 Holes / Right Binding
(Portrait)
ABCD ABCD
2 Holes / Top Binding
(Portrait)
2 Holes / Top Binding
(Landscape)
ABCD
ABCDEF ABCDEF
ABCDEF
Stream Punch / Left Binding
(Portrait)
Stream Punch / Left Binding
(Landscape)
ABCD
ABCDEF