Back cover from post inserter, Transparency interleave – Konica Minolta bizhub PRO 950 User Manual
Page 165
PCL Printer Driver Setting (Windows)
8
bizhub PRO 950
8-48
Back Cover from Post Inserter
Sets a back cover for which the paper is from the PI Tray 1 or PI Tray 2.
And also, the continuous insertion of up to 20 sheets is available for each of
the Font cover/Back cover.
The [Back Cover from Post Inserter] cannot be set in the following cases:
-
When the [Cover Sheet Feeder] is not selected in the [Configure] tab.
Transparency Interleave
Check when using Transparency.
2
Note
You can select when Transparency is set for Bypass Tray.
Blank
This is set when inserting the blank interleaf for the trans-
parent sheet.
Printed
This is set when inserting the printed interleaf for the
transparent sheet.
Interleave Tray
Uses to select the paper tray for Transparency Interleave.