Konica Minolta bizhub PRO 950 - Manual (Page 213)

PostScript PPD Printer Driver setting (Windows) 9
bizhub PRO 950 9-28
Fold
Various ways of the folding can be setup.
The [Fold] cannot be set in the following cases:
-
When any item other than [Off] is selected for the [Staple], [Punch], only
[Z-fold] can be selected.
- When any item other than [Off] is selected for the [Front Cover], [Back
Cover], [PI Front Cover] and [PI Back Cover].
The setting of [Fold] is available when the following unit is installed.
Image Shift
Adjusts the details of the printing position to the output paper.
Z-Fold
Center Staple and Fold
Multi-Letter Fold In
Multi-Letter Fold Out
Multi-Half Fold
Punch Z-Fold Unit Finisher (FS-611)
Z-Fold o
Multi-Letter Fold (In/Out) o
Multi-Half Fold o