Konica Minolta bizhub PRO 950 - Manual (Page 249)

PostScript PPD Printer Driver setting (Mac OS X) 10
bizhub PRO 950 10-30
Output - Output Method - Wait Mode/Proof and Print
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Select [Security] from pop-up menu.
3
Select [Wait Mode] or [Proof and Print] in the [Output Method].
4
Click [Print] to perform printing from the application.
– When the [Wait Mode] is selected, it stops without being printed.
– When the [Proof and Print] is selected, only one part is printed and
it stops.
On the copier's control panel, the Mode Check screen appears.
5
In case of [Proof and Print], [MACHINE] tab blinks on the right above
the copier touch panel screen. Press [MACHINE] tab.
Mode Check screen appears on the control panel of copier.
6
Confirm the current settings.
– If you do not change any setting,
proceed to the step 9.
7
If necessary, select the item and press [ChangeSetting] to change set-
tings.
8
Press [OK].
The Mode Check screen will be restored.
9
Press [START] to resume the rest of the print job.