Konica Minolta bizhub PRO 950 - Manual (Page 295)

Utility Tool 13
bizhub PRO 950 13-28
7
After you have supplied all values, press Enter.
You can now print.
Setting Up an AIX 4.0 System
Use these procedures to install the network interface card in a AIX 4.0 sys-
tem:
1
Run SMIT Printer.
2
Select [Print Spooling].
3
Select [Add a Print Queue].
4
Select [Remote].
5
Use [Standard Processing].
6
Assign a queue name.
7
Use the host address of the Network Interface Card for the Remote
System.
8
Use [PRINT] for the queue on the remote system.
9
Add a description (optional).
10
Press [Enter] to generate.
– Installation is complete. Test your printer by executing the following
command:
– lp -d<queue_name> <file_name>
Data Requested Example Data Description
Name of queue to ad print1 Name of local printer
queue Destination Host printfast NIC IP hostname
Short Form Filter /usr/lpd/bsdshort Required value
Long Form Filter /usr/lpd/bsdlong Required value
Name of remote printer
queue PRINT Network interface card
Name of device to add print1 Name of local queue