Konica Minolta bizhub PRESS 1250P - Manual (Page 13)

bizhub PRESS 1250P 2-5
2.1 Safety Information 2
2.1.7 Ventilation
2.1.8 Actions in Response to Troubles
After installing this product, mount it on a secure base. If the
unit moves or falls, it may cause personal injury.
Do not place the product in a dusty place, or a site exposed
to soot or steam, near a kitchen table, bath, or a humidifier.
A fire, electrical shock, or breakdown could result.
Do not place this product on an unstable or tilted bench, or
in a location subject to a lot of vibration and shock. It could
drop or fall, causing personal injury or mechanical break-
down.
Do not let any object plug the ventilation holes of this prod-
uct. Heat could accumulate inside the product, resulting in a
fire or malfunction.
Using this product in a poorly ventilated room for a long time
or producing a large volume of prints may cause the odor of
exhaust air from the machine. Ventilate the room well.
Do not keep using this product, if this product becomes inor-
dinately hot or emits smoke, or unusual odour or noise. Im-
mediately turn OFF the power switch, unplug the power cord
from the power outlet, and then call your authorized service
representative. If you keep on using it as is, a fire or electrical
shock could result.
Do not keep using this product, if this product has been
dropped or its cover damaged. Immediately turn OFF the
power switch, unplug the power cord from the power outlet,
and then call your authorized service representative. If you
keep on using it as is, a fire or electrical shock could result.
The inside of this product has areas subject to high temper-
ature, which may cause burns.
When checking the inside of the unit for malfunctions such as
a paper misfeed, do not touch the locations (around the fus-
ing unit, etc.) which are indicated by a "Caution HOT" caution
label.