Konica Minolta bizhub C35 - Manual (Page 60)

Useful transmission functions (G3 fax) 3-15
[Password TX]
A password transmission can be specified.
Password transmission is the function for sending a fax with a password
applied. This function can be used if the recipient’s fax machine is compatible
with closed network receptions.
If the recipient’s fax machine is set for closed network receptions, this
machine must transmit with the same password as the closed network recep-
tion password specified on the recipient’s machine.
To send a password transmission, press [Yes], and then use the keypad to
type in the closed network reception password specified on the recipient’s fax
machine.
"
If information was incorrectly entered, press the [C] key to erase the
entered information.
"
This function cannot be used together with F-code transmissions or
polling reception.
[F-Code TX]
An F-code transmission can be specified.
F-code transmissions are the function for sending a fax to a specific recipi-
ent’s box with a specified Sub address and password.
To send an F-code transmission, press [Yes]. Press [Sub Address] or [Pass-
word], and then use the keypad to type in the corresponding settings. The fol-
lowing types of recipient boxes are available.
„ Confidential TX
The fax will be sent to a confidential box on the recipient’s machine. Type
in the box number for [Sub Address], and type in the communication
password for [Password].
„ Relay TX
The fax will be sent to a relay box if the recipient’s machine is equipped
with a relay transmission function. Type in the relay box number for [Sub
Address], and type in the relay password for [Password].
"
This function can be used if the recipient’s fax machine is compatible
with F-codes.
"
Confidential communication is the function for using a confidential box
to receive a document to be sent to a specific person. In order to send
a confidential transmission from this machine, a confidential box and
password must be specified on the recipient’s fax machine.