Konica Minolta bizhub 20P - Manual (Page 19)

19
Macintosh Wired Network
Wi
ndows
®
Maci
ntosh
Wir
ed Netwo
rk
For Wired Network Interface Cable Users
6 Connect the printer to
your Macintosh and
install the driver
a
Connect the network interface cable to the LAN
connector marked with a
symbol and then
connect it to a free port on your hub.
b
Make sure the printer power switch is on.
c
Turn on your Macintosh. Put the supplied
CD/DVD-ROM into your CD/DVD-ROM drive.
d
Double-click bizhub 20P icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
e
The KONICA MINOLTA software will search
for the KONICA MINOLTA printer. During this
time the following screen will appear.
f
Choose the printer you wish to connect, and
then click OK.
g
When this screen appears, click OK.
Note
• If there is more than one of the same printer
model connected on your network, the MAC
Address (Ethernet Address) will be displayed
after the model name.You can also confirm
your IP Address by scrolling to the right.
• You can find your printer’s MAC Address
(Ethernet Address) and the IP Address by
printing out the Printer Settings Page. See Print
the Printer Settings Page on page 22.
Finish
The installation is now
complete.