Konica Minolta bizhub C650 - Manual (Page 140)

C650 6-37
Useful transmission functions 6
6.17 Specifying the way of adding the transmission source information (Fax
Header Settings)
Fax Header Settings
Fax header (Transmission source information) can be added for each job at the time of fax transmission.
The contents added to original as fax header are registered in [Header Information] of the Utility mode.
The method of adding transmission source information is set in [Header/Footer Position] of the Utility mode.
!
Detail
For details of [Header Information], refer to "Registering transmission source name and fax number
(Header Information)" on page 9-51 and for the details of [Header/Footer Position] refer to "Specifying
the method of setting the transmission source/reception information (Header/Footer Position)" on
page 9-54.
For the details of recording location of fax header, refer to "Fax Header Settings" on page 2-42.
Specifying the Fax Header Settings
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to "Loading the original" on page 2-9.
3
Touch [Communication settings].
4
Touch [Fax Header Settings].
5
Specify whether to add the fax header.