Konica Minolta bizhub C650 - Manual (Page 24)

C650 1-6
Before use 1
1.5 Using the control panel
Control panel
1
2
4
5
3
6
7
8
13 14 12 9
15
16
17
18
11 10
19
20
21
22
No. Name Description
1 Touch panel Displays various screens and messages.
Specify the various settings by directly touching the panel.
2 Main Power indicator Lights up in green when the [Main power switch] is ON.
3 Sub power switch Press to turn the control panel ON or OFF. When turned OFF, the machine en-
ters a state where it conserves energy.
4 [Mode Memory] key Desired fax settings can be registered as a program destination and used to
send faxes by recalling the registered program destination. (page 2-28,
page 8-16)
5 [Utility/Counter] key Press to display the Utility mode screen and the sales counter screen.
6 [Reset] key Press to clear all settings (except programmed settings) entered in the control
panel and touch panel.
7 [Interrupt] key Press to enter Interrupt mode. While the machine is in Interrupt mode, the in-
dicator on the [Interrupt] key lights up in green and the message "Interrupted"
appears on the touch panel. To cancel Interrupt mode, press [Interrupt] key
again.
8 [Stop] key Press to stop the scanning of the original.
9 [Proof Copy] key If the [Proof Copy] key is pressed before the [Start] key is pressed, a finished
preview with the currently specified settings applied is displayed in the touch
panel. (page 2-44)
10 [Start] key Press to begin operation of the mode selected: Box, Fax/Scan or Copy. If a
Fax/Scan mode is selected, transmission will begin. When the machine is
ready to begin the operation, the indicator on the [Start] key lights up in blue.
If the [Start] key indicator lights up in orange, the selected operation is unable
to begin.
11 [Data] indicator Flashes blue while print job or fax is being received.
Lights up blue while print job or fax is in printing queue or is being printed.