Konica Minolta bizhub C650 - Manual (Page 244)

C650 9-63
Utility mode 9
9.25 Specifying memory reception settings (Memory RX Settings)
Whether or not to use the Memory RX function is set. When these settings are activated, password (within 8
digits) used at the time of printing is set.
Memory RX is the function of printing the received original after storing in the memory for some time and then
printing after the receiving such instruction and not printing it immediately.
Memory RX Settings: (Set password in 8 digits) /No*
* is a default value at the time of purchase.
!
Detail
When the [Memory RX Setting] is [ON], [PC-FAX RX Settings], [TSI User Box Settings] and [Forward TX
Setting] cannot be used.
Refer to "Handling Originals received by memory" on page 7-2 for the printing method etc. of the forced
memory reception document.
Specifying the Memory RX Settings
1
Display Administrator Settings screen after referring to "Displaying Administrator Settings screen" on
page 9-3.
2
Touch [Fax Settings].
– Some items may not be displayed according to setting options.
– In the Utility mode, numbers displayed on buttons can be entered and selected with the keypad. For
[Fax Settings], enter [8] with the keypad.
3
Touch [Function Settings].