Konica Minolta bizhub C650 - Manual (Page 289)

C650 11-6
Appendix 11
11.4 Fax Index
Terms that are generally used for fax transmission are explained.
Terms of the functions that are not stored for this function are also explained.
Terms Description
2in1 A function to send the page set as double-paged after mixing the 2 page original on one
paper.
Abbreviation/Address A function to register the fax number of the destination where fax is frequently sent. When
abbreviation/address is to be registered, if the destination name and the searched charac-
ter is registered, it is even possible to specify the destination using the searched character
of the abbreviated selection.
Alternate forwarding A function to forward the received original manually in stand using the setting confirmation
button of the touch panel. Alternate forwarding is set when the operation is interrupted due
to no paper or misfeed when Fax/Scan screen is displayed.
Background Removal A function to send the original after adjusting the brightness of the background color of the
original.
Batch transmission A function to auto send one original at a specified time when the transmission conditions
of destination, sending time, memory transmission or resolution etc. are stored in the same
original memory.
Baud rate Specifies the transmission speed of the modem for fax.
In this function, the fax can be communicated at a high transmission speed of 33,600bps.
When set to overseas communication mode, communication is at high transmission speed
a with a noise of 7200bps or 4800bps.
bps Abbreviation of bit per second.
bps is the amount of data sent in 1 second as the unit of data transmission.
Broadcast A single original is sent to many recipients in one operation.
Bulletin board This function posts the originals to be viewed, or stores the originals to be transmitted
through polling.
Confidential communi-
cation A function for sending and receiving originals to be viewed only by specific persons. The
sent confidential original is saved in a confidential box on the recipient’s fax machine and
is not printed when it is received. The received original can be printed if a specific operation
is performed, for example, the access code for the confidential box is entered.
Default value The setting value specified in advance when the machine was shipped from the factory.
Some default settings can be changed from the Utility mode. It is convenient when fre-
quently used value is set as default settings depending on the usage conditions.
Dial method There are three types: PB (push-button (tone) dialing), 10PPS (pulse dialing at 10 pps), and
20PPS (pulse dialing at 20 pps).
Binding Position A function for specifying the binding position of a double-sided original sent using the ADF.
There is top/bottom binding, where the binding position is at the top (or bottom) of the orig-
inal, and there is left/right binding, where the binding position is at the left (or right) of the
original. The top and bottom positions of the second side of the original differ.
ECM Error Correction Mode:
Error resend mode of G3 communication. Confirms whether the data is correctly sent to
the recipient or not and if the data is not correctly sent, communicates and resends the
same data. If the recipient is set for the ECM mode and as long as ECM off is not specified
in this machine, the communication is done by ECM.
Sender Fax No. The identification code for the mutual recognition when fax is transmitted. Normally the fax
number is registered as the Sender fax No.
F-code This is the communication procedure about the usage of the sub address of T.30* stand-
ardized by ITU-T (International Telecommunication Union) provided by CIAJ (Communica-
tions and Information network Association of Japan). In the communication between fax
with F-code function, various functions that use F-code can be used even if the maker is
different. In this machine, F-code is used by the bulletin boards, relay request, confidential
box transmission and password transmission. (*Communication standard)
Memory RX Function to store the received original in memory and to print if required.
Frame Erase A function for erasing the black shadow appeared on the left, right, upper and lower side
of the original while scanning the original formed of booklet keeping ADF open and then
transmitting the fax.
G3 A Fax communication mode standardized by the ITU-T (International Telecommunication
Union). There are G3 and G4 communication modes. Currently, G3 is the most frequently
used mode.
Group Grouping of the abbreviation No. of multiple groups. It is convenient when there are large
numbers of reception of sequential broadcast and sequential polling in the same address.