Konica Minolta bizhub C650 - Manual (Page 42)

C650 2-10
Transmission 2
3
Close the ADF slowly.
Faxing a multi-page original from the original glass
All pages of a multi-page original that cannot be loaded into the ADF can be faxed together using the original
glass.
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Specify the destination.
3
Specify the functions if required.
4
Load the original on the original glass, and touch buttons
in order of [Scan Settings], [Separate Scan], [OK] and
then press [Start] key.
5
Load the original sequentially on the original glass and press [Start] key.
– This operation is repeated until all the original to be sent is scanned.
– If [Change Setting] is touched, Simple/Duplex setting and Frame Erase setting, etc. can be changed.
The scanned original is stored in the memory.
6
Touch [Finish].
7
Press [Start] key.
The transmission begins.
Sending the original using both ADF / Original glass
An original is scanned using both ADF and original glass and the original divided into many parts can be
scanned after loading on ADF.
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Specify the destination.
3
Specify the functions if required.