Konica Minolta bizhub C650 - Manual (Page 86)

C650 3-6
Reception 3
3.5 Maintaining a record during reception
When printing the received fax, the page size of the received document is compared with the size of the
loaded paper, and the fax is printed by reducing at the specified reduction rate or by reducing so as to fit the
loaded paper. However, if printing is set for equal size printing, the received fax is printed of the same size
regardless of the paper size of the received fax.
2
Reminder
When a fax is received in color mode, it is normally printed in the same size.
When a fax is received in color mode, page division printing cannot be used.
The color mode can be used only in IP Address Fax.
!
Detail
For details on reduction rate, refer to "Settings of transmission and reception mode (TX/RX Settings)"
on page 9-58.
Reduction printing
When regular size document is received, printing is done by reducing by the reduction rate set for that paper
size. (Default value is 96%)
Printing by reducing to fit the paper
When the received document is longer than regular size, an appropriate paper size is determined from the
width and length of the received document and it is printed on a paper of that size. When the most
appropriate paper size is not loaded in the paper tray, the document is reduced and printed on a paper of the
nearest size.
Standards of determining the appropriate paper size and paper selection are as follows.
Document Received document
Reduced
according
to the
setting
specified
for "Min.
Reduction
for RX
Print".
Document Received document
Reduced
to fit the
paper