Konica Minolta bizhub C300 - Manual (Page 68)

Using copy functions 2
C300 2-31
Using copy f
unct
ions
Chapter 2
2.10 Selecting Fold & Staple settings
The paper that is fed out can be folded in half and
stapled at two places along the center.
The Fold & Staple settings are available only if the
saddle stitcher is installed on the finisher.
The following procedure describes how to specify Fold
& Staple settings.
To bind paper at the center (Fold & Staple settings)
1
In the Basic screen, touch [Fold & Staple].
The Fold & Staple screen appears.