Konica Minolta BIZHUB C351 - Manual (Page 228)

Specifying Settings From the Control Panel 3
C351 3-117
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
3.28 LPD Settings
The use of LPD when printing can be enabled or disabled.
To specify LPD settings
1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [7 LPD Setting].
The LPD Setting screen appears.
4
Touch [Enable] or [Disable].
5
Touch [OK].
The use of LPD is enabled or disabled.
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.