Konica Minolta bizhub C35 - Manual (Page 230)

Specifying destinations 10-15
Selecting with an index search
Destinations can be selected by searching for the index characters specified
when each destination was registered.
1
In the initial Scan to E-mail mode screen, press .
2
Press the desired index tab to search for destinations.
– If the desired index tab is not displayed, press [
] or [ ] until the
desired tab appears.
– To select a group destination, press [Group].
3
Select the destination, and then press [OK].
"
To specify multiple destinations, specify all destinations where the
data is to be sent.
Selecting by searching for a destination type or name
Destinations can be selected by searching for their type or name.
1
In the initial Scan to E-mail mode screen, press .
2
Press [Search].
3
Select the method to search for destinations.
– [Type]: Select the destination type (“Fax”, “E-mail”, etc.).
– [Name]: Directly enter the name of the destination to be searched for.
Type in the name to be searched for, and then press [OK] to display a
list of the search results.
4
Select the destination, and then press [OK].
– To specify multiple destinations, select all destinations where the data
is to be sent.
5
Press [OK].