Printing flow, Printing flow -3 – Konica Minolta bizhub C300 User Manual

Page 16

Advertising
background image

Overview

1

C300

1-3

Printing flow

When using this printing system as a printer, the flow of the main process is
described below.

Print commands transmitted from the application are received by the printer
driver.

Data is transmitted to this machine over a parallel interface (IEEE 1284) when
this machine is used as a local printer, over a USB interface when this ma-
chine is used as a USB printer, or over an Ethernet interface (TCP/IP, IPX/
SPX or AppleTalk) when this machine is used as a network printer. The data
is then delivered from this machine to the printer controller, which performs
image rasterization (development of output characters and images to bitmap
data). Finally, this data is printed from this machine.

2

Note

The parallel and USB interfaces cannot be used simultaneously.

Original documents can be scanned in the copy function or network scan
function while this machine is operating as a printer.
To use this machine as a copier, press the [Copy] key on the control panel.

Computer

Used as a local

printer

Used as a USB

printer

Application

Application

Application

Used as a

network printer

Printer driver

Printer driver

Printer driver

Parallel interface

(IEEE 1284)

USB

Ethernet (TCP/IP, IPX/

SPX, or AppleTalk)

Machine

Print

Printer controller

PS/PCL processing (rasterizing)

Advertising