11 netware setting function, 1 making the netware setting, From the control panel – Konica Minolta bizhub C450P User Manual
Page 79: Netware setting function -62
2
Administrator Operations
2-62
C450P
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.11
NetWare Setting Function
When access to the Admin. Setting mode by the Administrator of the ma-
chine is authenticated, the machine enables registration as the Print Server.
2.11.1 Making the NetWare Setting
2
Note
Do not leave the machine with the Admin. Setting mode setting screen
left shown on the display. If it is absolutely necessary to leave the ma-
chine, be sure first to log off from the Admin. Setting mode.
<From the Control Panel>
0
For the procedure to call the Network Setting screen to the display, see
steps 1 and 2 of “Changing the auth-password and priv-password” on
page 2-52.
1
Call the Network Setting to the screen from the control panel.
2
Press the [+] or [,] key to display “NetWare.”
3
Press the [
)
] key.
4
Make the necessary settings.
5
Press the [Menu/Select] key and then press the [Cancel] key.
c450P_security_E.book 62 ページ 2007年4月10日 火曜日 午後6時49分