12 smb setting function, 1 setting the netbios name, From the control panel – Konica Minolta bizhub C450P User Manual
Page 81: Smb setting function -64
2
Administrator Operations
2-64
C450P
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.12
SMB Setting Function
When access to the Admin. Setting mode by the Administrator of the ma-
chine is authenticated, the machine enables setting of the NetBIOS Name.
2.12.1 Setting the NetBIOS Name
2
Note
Do not leave the machine with the Admin. Setting mode setting screen
left shown on the display. If it is absolutely necessary to leave the ma-
chine, be sure first to log off from the Admin. Setting mode.
<From the Control Panel>
0
For the procedure to call the Network Setting screen to the display, see
steps 1 and 2 of “Changing the auth-password and priv-password” on
page 2-52.
1
Call the Network Setting to the screen from the control panel.
2
Press the [+] or [,] key to display “SMB.”
3
Press the [
)
] key.
4
Press the [+] or [,] key to display “Printer.”
5
Press the [
)
] key.
6
Press the [+] or [,] key to display “NetBIOS Name.”
7
Press the [Menu/Select] key.
8
Press the [+] and/or [,] key to enter the NetBIOS Name.
9
Press the [Menu/Select] key and then press the [Cancel] key.
c450P_security_E.book 64 ページ ２００７年４月１０日 火曜日 午後６時４９分