Konica Minolta bizhub C353 - Manual (Page 77)

C353 2-62
Administrator Operations 2
2.11.3 Setting the Encryption Key (encryption word)
2
Note
When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on and
off:
Turn off the sub power switch
→ Turn off the main power switch → Turn on the main power switch →
Turn on the sub power switch
Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
<Setting can be made only from the control panel>
0 For the procedure to call the HDD Settings menu to the display, see steps 1 and 2 of "Setting the HDD
Lock Password" on page 2-56 .
1
Call the HDD Settings to the screen from the control panel.
2
Touch [HDD Encryption Setting].
3
A message appears that confirms whether or not the setting of the Encryption Key is to be continued.
Select [Yes] and touch [OK].