Konica Minolta Darwin VDP Software - Manual (Page 59)

16. In the Or else box, click use color.
17. Click the browse button.
18. In the Select Color dialog box, select a color to use for all the records
that do not meet the condition of the rule. Make sure the color
differs from the one selected earlier.
19. Click OK.
The selected color appears in the Or else box.
20.On the Tools panel, click Accept .
Your rule is added to the Rules list.
21. From the File menu, select Save.
Adding a visibility rule
Add a rule that controls whether a layer of your InDesign CS3 file will
appear in personalized VDP output.
For each layer that you want to show or hide, you need to add a
separate visibility rule.
1. In the Darwin workspace, click the ToolBox tab.
2. On the Tools panel, click Rules.
3. Click Add New Rule .
4. In the Name box, type a meaningful name for the rule.
5. (Optional) In the Comments box, type a comment about the rule.
6. In the Type list, select Visibility.
7. Click OK.
8. In the Rule Editor area, add a condition, as follows:
a. In the If list, select the desired field. For example, select Country.
Adding a visibility rule 51