Start of batch scan, Close of batch scan, Start of batch scan -12 – Konica Minolta ScanDiva User Manual
Page 24: Close of batch scan -12
3
Operation
of
Application
3-12
ImageDIVA Touch
Start of Batch Scan
1.
The "Scan" button is pressed after “Scan Mode" is set, and the original is read.
NOTE ! The image in the Preview Window is not saved until the "Start" button
is pressed.
2.
Sets the ”Image Mode", ”Image Adjustment”, “File Format", and "“Cropping
Area".
3.
When “Start” button is pressed, the image displayed in the “Preview Window” is
saved. Also, Batch Scan begins and the “Start “button changes to “Done”.
4.
When the "Scan" button is pressed when Batch Scan mode is active, the
Image file is saved.
NOTE ! When in Batch Scan mode, the "Scan Mode", “Image Mode", “Image
Adjustment", “File Format", and "Clear" buttons are not active.
Close of Batch Scan
If the “Done” button is pressed the Batch Scan session is ended and the button
changes to “Start”. In addition, the "Scan Mode", “Image Mode", “Image Adjustment",
and “File Format", and "Clear" buttons become active.