Konica Minolta ScanDiva - Manual (Page 27)

Application Settings
4
ImageDIVA Touch 4-3
4-4 Open the TWAIN Driver screen
When Ctrl-o is pressed, the active view of the TWAIN driver of the Scanner is
displayed.
Detailed settings can be made in the TWAIN Driver view.
For the ScanDIVA
NOTE !  Scanning cannot be executed from the TWAIN Driver's screen.
 The following settings are not valid when scanning using the
TWAIN driver:
Mode (ScanDIVA)
Image Mode (Excluding ScanDIVA),
Page
Rotate
Cropping Area in Preview
 The Size and Resolution settings must be values that are valid in
the Scan Mode.
 Scanning of three-dimensional objects is not supported by the
TWAIN driver.
 For detailed information, please refer to the Operators Manual or
Users Guide of the scanner.