Konica Minolta bizhub 25e - Manual (Page 134)

1
2
3
4
5
Machine information
Machine status 5-11
Importing machine settings
You can import the settings from another machine.
NOTE
Take care when importing the machine settings, as all the information registered by
users (including documents) will be erased.
1
Click [Admin Login] in Message Board, and log in (page 1-7) .
This function may also be available on Guest and User login screen, depending on user policy
settings.
2
Click [Browse] in “Maintenance Setting”.
The “Choose File to Upload” dialog box is displayed.
3
Select the file to import, and click [Open].
4
Click [Import].
• To import only the machine settings, select “Machine Settings Only”.
• To import all the machine settings including the user information, select “All (including User
Information)”.
• Refer to the appendix in “Importing / Exporting using USB memory” in chapter 2, “Mirroring
the machine settings” in the Administrator's Guide for the difference between the settings
imported when you select “Machine Settings Only” and the settings imported when you
select “All (including User Information)”.
5
The import process starts when you click [OK].
When the import process is completed, the machine will restart automatically.
NOTE
One of the following import results is displayed in the “Status” field:
• The import has been completed.
• Failed to import.
• Importing was canceled. The data was created by a different type of unit.
• Importing was canceled. The data was created by different data source.
• Importing was canceled because the data is invalid.