Konica Minolta bizhub C451 - Manual (Page 223)

Setting up the PostScript driver (Windows) 6
C451 6-28
8
Specify the overlay printing method.
– Pages: Specifies the pages to print.
– Overwrite: Specifies the sequence for printing the overlay on top of
the original document.
9
Click the [OK] button.
The Stamp/Composition tab appears again.
10
Click the [OK] button.
The Print dialog box appears again.
11
Click the [Print] button.
The printing of the overlay is performed.
Editing an overlay file
To use an overlay, an overlay file must be created and added to the overlay
file list. You can create and save a new overlay file by selecting the “Create
Overlay File” check box, specifying the document that you want to create as
an overlay file, then clicking the [Print] button on the Print dialog box. To add
an existing overlay file that was created to the list, specify the file.