For windows xp/server 2003, For windows xp/server 2003 -19 – Konica Minolta bizhub C451 User Manual

Page 64

Advertising
background image

Installing the printer driver

2

C451

2-19

For Windows XP/Server 2003

1

After using a USB cable to connect this machine to a computer, turn
the computer on.

Do not disconnect or connect the cable while the computer is start-
ing up.

2

Insert the printer driver CD-ROM into the computer’s CD-ROM drive.

3

Turn the main power of this machine on.

If the Add New Hardware Wizard does not start up, turn the main
power off, then on again.

When turning the power off, then on again, wait at least 10 seconds
before turning the power on again; otherwise, this machine may not
function properly.

The Found New Hardware Wizard dialog box appears.

4

Select “Install from a list or specific location (Advanced)”, and then
click the [Next] button.

If the Windows connect to Windows Update dialog box appears,
select “NO”.

5

From “Search for the best driver in these locations”, select “Include this
location in the search”, and then click the [Browse] button.

6

Specify the desired folder on the CD-ROM that contains the printer
driver, and then click the [OK] button.

Select the specified folder according to the printer driver to be
used, the operating system, and the language.

Printer drivers that can be selected: Windows XP/Server 2003: PCL
driver, PS driver, Fax driver

7

Click the [Next] button, and then follow the on-screen instructions.

When the Digital Signature dialog box appears, click the [Continue]
button.

8

Click the [Finish] button.

9

When installation is complete, make sure that the icon of the installed
printer appears in the Printers and Faxes window.

10

Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

Advertising