Konica Minolta bizhub C300 - Manual (Page 161)

4 Application Software
4-6 C300
Application Software
Chapter 4
4.1.2 Setting the user authentication method
2
Reminder
To change the user authentication method from “Device authentication”
to “Network server authentication,” it is necessary first to register the do-
main name of Active Directory on the machine side.
If “Network server authentication” is selected, “Active Directory” must in-
variably be selected.
< From the PC>
0 For the procedure to access the machine, see steps 1 through 5 of
“Gaining access from PageScope Data Administrator” on page 4-3.
1
Access the machine through PageScope Data Administrator.
2
Click the [Authentication settings].
3
Click the [User authentication].
c300_security_E.book 6 ページ ２００７年４月１１日 水曜日 午前１０時４２分