Konica Minolta bizhub C300 - Manual (Page 22)

Administrator Operations 2
C300 2-3
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
When accessing the Administrator Setting mode from the control panel,
if you have already logged on to the Administrator Setting mode using
PageScope Web Connection, the machine displays a message that tells
not to turn off the power because of the remote operation being per-
formed and rejects any operation on the control panel. Wait until the mes-
sage disappears before attempting to access the Administrator Setting
mode once again.
When accessing the Administrator Setting mode from the control panel,
if [Export to the device] operation is being executed using the PageScope
Data Administrator, the machine displays a message that tells not to turn
off the power because of the remote operation being performed and re-
jects any operation on the control panel. Wait until the message disap-
pears before attempting to access the Administrator Setting mode once
again.
<From the Control Panel>
1
Press the [Utility/Counter] key.
2
Touch [Administrator Setting].
? Is it possible to gain access to the Administrator Setting mode while
a job is being executed?
% The machine does not accept access to the Administrator Setting
mode while a job is being executed. Wait until the execution of the
job is completed before attempting to access the Administrator
Setting mode again.
c300_security_E.book 3 ページ ２００７年４月１１日 水曜日 午前１０時４２分