11 server setting, Configuration, Server setting -18 – Konica Minolta PageScope Job Spooler User Manual
Page 31: Configuration -18
Advertising
Using the PageScope Job Spooler Client
4
4-18
4.11
Server Setting
Configuration
Basic settings for the PageScope Job Spooler server can be specified.
G
Port Number
Specify a value between 1 and 65535. The default setting is “9070”.
G
Administrator Password
Specify a maximum of 16 alphanumeric characters. The default
setting is “admin”.
G
Device List (min.)
Specify a time period between 1 and 99 minutes. The default setting
is 10 minutes.
G
SNMP Communication Setting
Timeout (sec.): Specify a time period between 1 and 99 seconds. The
default setting is 5 seconds.
Retries: Specify a value between 0 and 9. The default setting is 0
times.
Advertising