Adding devices, Adding devices -20 – Konica Minolta PageScope Job Spooler User Manual
Page 33
Using the PageScope Job Spooler Client
4
4-20
G
Discovery Network Range
Specify the range on the network for searching for devices.
G
Discovery Interval
Specify the interval for searching for devices.
G
Last Discovery Time
The most recent time when devices were searched for is displayed.
G
SNMP Setting
Specify the read community name and port number for SNMPv1 and
SNMPv3 transmissions.
G
Discovery Now
Click this button to immediately search for devices.
Adding devices
Devices to be managed can be manually added.
1
Double-click “Add Device”.
2
Specify the settings for the device to be added.
H
IP Address
Type in the IP address of the device to be added.
H
Port Number
Specify a value between 1 and 65535 for the port number of the
device using SNMP transmission. The default setting is “161”.
H
Read Community Name
Specify the read community name used for SNMPv1 transmission.
H
User Name
Specify the user name used for SNMPv3 transmission.
H
Context Name