Konica Minolta magicolor 5550 - Manual (Page 194)

Configuring the Printer 176
Device Information
Summary (shown above)
The System - Device Information - Summary window provides the follow-
ing information.
Item Description
Printer name/status Shows the name assigned to your printer, and dis-
plays the current status of the printer—just as it’s
displayed on the printer’s control panel message
window.
"
The status display allows you to remotely
identify possible printer problems, such as out
of paper and out of toner.
Device Status
(Product image) Identifies the type of printer that you are browsing.
The printer is pictured in the illustration with all
installed options.
Memory Displays the amount of memory installed in the
printer.
HDD If an optional Hard Disk is installed in the printer, dis-
plays the size of the Hard Disk.
If no optional Hard Disk is installed in the printer, dis-
plays “Not Installed”.
Memory Card If an optional Memory Card is installed in the printer,
displays the size of the Memory Card.
If no optional Memory Card is installed in the printer,
displays “Not Installed”.
Duplex Identifies whether the duplex option is “Installed” or
“Not Installed”.
Paper Source Identifies the paper feed units installed on the
printer.
Output Tray Identifies the output trays installed on the printer.
Finisher Identifies whether the staple finisher is “Installed” or
“Not Installed”.
Network Lists the installed printer interface (Ethernet
10Base-T/100Base-TX/1000Base-T).