Konica Minolta BIZHUB C30P - Manual (Page 15)

4 Peer-to-Peer Print Setup
10
4.1.2 Configuring for TCP/IP Peer-to-Peer Printing by
Specifying the Device Manually
Perform the following steps to specify the device manually when
configuring for TCP/IP peer-to-peer printing. See 4.1.1 Configuring
for TCP/IP Peer-to-Peer Printing for the procedure you should use
when the device you want to configure is included in the
Device List
on the Peer to Peer Setup dialog box.
1. Click the Manual Setup button to display the Peer to Peer
Manual Setup dialog box.