Konica Minolta BIZHUB C30P - Manual (Page 18)

4 Peer-to-Peer Print Setup
13
4.2.2 Configuring for IPX Peer-to-Peer Printing by
Specifying the Device Manually
Perform the following steps to specify the device manually when
configuring for IPX peer-to-peer printing. See 4.2.1 Configuring IPX
Peer-to-Peer Printing for the procedure you should use when the
device you want to configure is included in the
Device List on the Peer
to Peer Setup dialog box.
1. Click the Manual Setup button to display the Peer to Peer
Manual Setup dialog box.