Konica Minolta MAGICOLOR 4695MF - Manual (Page 143)

Troubleshooting 119
Troubleshooting
Symptom Solution
The setting in the saved
presets are not applied. Depending on the functions selected for the
printer, some preset settings are not saved.
Media type error appears. If a media type, such as “Transparency”, is
specified for Tray 2, a media type error
appears and the printer stops. Be sure to
specify a media type supported by Tray 2.
The printer stops respond-
ing. Depending on the operating system, some
paper size and paper type combinations are
not permitted. If the job was sent with an
incorrect combination of settings, the printer
stops responding. Be sure to print with the
correct combination of paper size and paper
type settings.
The printer is not detected
using Rendezvous/Bon-
jour. Using Administrator mode in PageScope
Web Connection, select the Enable from the
Bonjour list on the Bonjour page.
Checking the version num-
ber of the printer driver and
PPD file. „ For Mac OS X 10.4:
Select the printer from Printer Setup Utility,
and then click Show Info in the Printers
menu. In the pop-up menu of the Printer
Info dialog box, select Name & Location.
„ For Mac OS X 10.5/10.6:
Select the printer from Print & Fax, and
then click Options & Supplies. Click Gen-
eral tab.
The dialog box may appear
unusual when selecting
other manufacturer printer
and back to magicolor. Close the Print dialog box, and then open it
again.
The custom paper size is
different from the size that
was set. Depending on the operating system, the cus-
tom paper size settings may change slightly
due to OS round off errors in unit conversion
(for example, 5.80" may change to 5.79").