Konica Minolta Print Status Notifier - Manual (Page 12)

Using Print Status Notifier 3
Print Status Notifier 3-5
3.3.3 Device Jobs (when User Authentication is disabled)
If User Authentication is disabled on a device, the jobs must be monitored
manually.
Flow of job information notification
1
The user executes a job on the operation panel of the device.
2
The job number of the job that was executed is displayed on the oper-
ation panel.
3
The user memorizes or notes the displayed job number and then re-
turns to computer on which Print Status Notifier is installed.
4
From the job number that was noted, the user begins monitoring the
job manually.
5
The job is monitored by the Print Status Notifier.
6
The job is executed by the device.
7
When the status of the monitored job changes, pop-up messages ap-
pear so that the user can view the job information.
7. Displays the job information
3. Returns to desk
2. Displays the job number
1. Executes a job
6. Executes the job
4. Manually monitors
the job
5. Monitors jobs