Konica Minolta Print Status Notifier - Manual (Page 23)

Using Print Status Notifier 3
Print Status Notifier 3-16
3.5.4 Specifying authentication settings
If User Authentication is enabled on the device that is to be monitored, the
authentication settings for logging in to the device must be specified.
Since the necessary authentication settings are normally specified when a
device to be monitored is registered, it is not necessary to change the au-
thentication settings. Change the authentication settings only if changes to
the settings are required after the device to be monitored is registered.
Operating procedure
1
Display the Settings dialog box.
– For displaying the Settings dialog box, refer to “About the Settings
dialog box” on page 3-7.
2
Select the device to be specified.