Xerox WorkCentre M118-M118i-15205 - Manual (Page 64)

6 Microsoft Networking
64 Xerox CopyCentre/WorkCentre 118 System Administration Guide
SMB Environments
Server Message Block (SMB) is a protocol for sharing files or printers on Windows OS.
This section explains the installation procedure for connecting a printer to a Windows
network through SMB.
System configuration
As the machine supports SMB protocol, you can send print data directly to the machine
on the same network without going through the server.
You can use either NetBEUI, TCP/IP, or even both as the transport protocol for SMB.
You will need to set up the IP address on the machine and the computer if you are using
TCP/IP.
NOTE: Windows XP/Windows Server 2003 does not support NetBEUI.
NOTE: You can make SMB settings through CentreWare Internet Services. For more
information on how to make SMB settings, refer to CentreWare Internet Services
chapter.
Target computers
The following computers support printing through SMB.
NOTE: NetBEUI is not recommended by Microsoft to be used as a protocol in new
networks. It is recommended that this protocol is only used in small networks where
existing legacy clients require it.
Connection OS Protocol
Windows network Windows 95
Windows 98
Windows Me NetBEUI
TCP/IP
Windows NT 4.0 NetBEUI
TCP/IP
Windows 2000 NetBEUI
TCP/IP
Windows XP
Windows Server 2003 TCP/IP